0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

FREE Shipping

0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


The knife manufacturer Microtech uses a variation of this with 3 round holes arranged in a triangle shape. The camera company Leica Camera has used versions of this on rewind knobs and other levers on their rangefinder cameras. [ citation needed] 12-spline flange [ edit ] Other combinations are a Phillips and Robertson, a Robertson and a slotted, a Torx and a slotted and a triple-drive screw that can take a slotted, Phillips or a Robertson.

Avsafe". www.losspreventionfasteners.com. Archived from the original on 2017-03-01 . Retrieved 2017-02-28. Similar to flathead screwdrivers, there are a wide range of sizes and lengths for Phillips screwdrivers and they also come in both manually driven and electric options. While Phillips screwdrivers do provide better control and driving power, the tip can still slip out of the screw head if it is driven with too much force. Go slow to ensure that the screwdriver tip grips the screw properly to avoid stripping the screw head. A Phillips screw head is slightly different from a PoziDriv; [10] see §Pozidriv section below for details. United States Maritime Service Institute. (1949). Engine Room Tools. New York: Mast Magazine Association. p. 25 Triangular recesses and heads". Screw drive systems. Archived from the original on 2016-10-24 . Retrieved 2017-09-02.

Robertson screws are commonplace in Canada, though they have been used elsewhere [14] :85–86 and have become much more common in other countries. As patents expired and awareness of their advantages spread, Robertson fasteners have become popular in woodworking and in general construction. Combinations of Robertson/Phillips/slot drives are often used in the electrical trade, particularly for device and circuit breaker terminals, as well as clamp connectors. Handle, generally wooden or plastic handles, are fixed to the screwdrivers. To save the wooden handle from being broken, an iron is fixed to the handle.#2. Shank McMaster-Carr catalog (116thed.). p.3056. Archived from the original on 2019-12-14 . Retrieved 2010-05-06. Needs login Tamper-resistant types [ edit ] A set of "secure" or otherwise less common screwdriver bits, including secure Torx and secure hex or "allen" variants.

Line Head and Line Recess screw drives are Japanese systems with male, female and tamper-resistant configurations. [72] MTI Catalog" (PDF). moodytools.com. Archived (PDF) from the original on 2014-01-09 . Retrieved 2014-01-10. Transactions of Technical Conference on Metric Mechanical Fasteners. American National Standards Institute. 1975. p.67. Archived from the original on 2021-04-15 . Retrieved 2020-10-26.a b arcticpenguin (2008-12-29). "SupaDriv". Instructables.com. Archived from the original on 2012-03-24 . Retrieved 2012-03-12. Torx Paralobe is a further improvement over Torx Plus, [48] claiming 50% increased drive system torque over Torx and 20% over Torx Plus. Fastener Superstore Fastener Guide". Archived from the original on 2017-12-29 . Retrieved 2017-12-28. The 12-spline flange screw drive has twelve splines in the fastener and tool. It consists of 12 equally spaced protrusions, each with a 60° angle. It is achieved overlaying 4 equilateral triangles, each one rotated 30° over the previous one. The spline drive was part of the obsolete, U.S-designed Optimum Metric Fastener System and was defined by ASTM B18.2.7.1M, which was withdrawn in 2011, [81] making the spline drive obsolescent. Hi-Torque slot drives were designed by Alcoa Fastening Systems, for situations where very high torque is needed, along with the ability to repeatedly install and remove the fastener. [7] The design features curved walls, unlike the straight-walled slot drive.

Screw Holding Screw Driver" (PDF). Audiocraft Magazine: 7. April 1956. Archived (PDF) from the original on 2021-10-16 . Retrieved 2018-09-17. a b c "Unterschied zwischen Pozidrive und Superdrive"[Difference between Pozidriv and Supadriv] (in German). Goedkopeschroevenkopen.nl. Archived from the original on February 22, 2014 . Retrieved 2014-03-20. A cross or double-slot screw drive has two slots, oriented perpendicular to each other, in the fastener head; a slotted screwdriver is still used to drive just one of the slots. This type is usually found in cheaply-made roofing bolts and the like, where a thread of 5mm (0.20in) or above has a large flattened pan head. The advantage is that they provide some measure of redundancy: should one slot be deformed in service, the second may still be used.UPDATE: after finally finding a proper Y000 driver at a local electronics store I was able to complete a repair on an Apple Watch series 3. While I did have some success filing down a cheap tri-wing driver until it fit the screws, there was one screw that it wouldn't loosen. The bottom line is this: Phillips Screw Company". Phillips-screw.com. Archived from the original on 2017-05-02 . Retrieved 2017-05-01. TORX PLUS Tamper-Resistant Drive System". www.acument.com. Archived from the original on 2019-04-18 . Retrieved 2019-04-18. National Bureau of Standards. (1942) National Bureau of Standards Handbook H28, Screw Thread Standards for Federal Services. pp. 177, 179, 182, 184

Sizes are: M4, M5, M6, (M7), M8, (M9), M10, (M11), M12, (M13), M14, (M15), M16, (M17) and M18 (the sizes in parentheses are less commonly used, but they do exist). Despite the similar naming scheme to metric fasteners, there is no correlation between the name of the size and the dimensions of the tool. Some sizes (at least M14, M16, M18) are also available in a tamperproof version (with a center hole) Recessed head fastener and driver combination". Google Patents. 2015-12-11. Archived from the original on 2020-01-26 . Retrieved 2017-10-13. The Slotted/Pozidriv is slightly different from the Slotted/Phillips (PH/S), and good use requires special screwdrivers. [ citation needed] ACR Phillips II Plus [ edit ] ISO 8764-1:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01. The Phillips Screw Company". www.phillips-screw.com. Archived from the original on 2014-12-21 . Retrieved 2015-01-16.One of the greatest tool inventions ever made is the screwdriver. Screwdrivers were reportedly created in the 15th century, and as we moved into the 21st century, you could find them in almost every toolbox.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop