Yakamoz 1/4 Inch Shank Rabbeting Router Bit with 6 Bearings Set for Multiple Depths 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"

FREE Shipping

Yakamoz 1/4 Inch Shank Rabbeting Router Bit with 6 Bearings Set for Multiple Depths 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"

Yakamoz 1/4 Inch Shank Rabbeting Router Bit with 6 Bearings Set for Multiple Depths 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


To be fair, I've only really used my router for putting nice edges on right-angled pieces of wood, plus my latest attempt at a rabbet. What I would like to do, though, is (realising that I must bite the bullet for building some jig / sled type thing) build myself a crosscut sled so I bought some 18mm plywood last night, and some wood for the runners and some for the fences... I do my work in the garden so if the weather holds out I'll give a crosscut sled for the Bosch GTS 10 J a go later today... Or I could use my new table saw to cut twice and get a rabbet like that... but I was wondering why I'm finding it difficult to source this - usually there's a reason, right?

As the bit is also non-guided e.g. it does not feature a bearing it can also be used to great effect for hollowing out objects. These bits come in two forms: single and double. Single rounding-overs create their profile on a single edge, producing a quarter-round effect. The double rounding-overs bits cut the bottom and top edge simultaneously, making a full half-round profile. Attractive: You can place the seam where it isn’t visible — say, under a countertop — and the fasteners can be hidden with filler or made from doweling. Due to the nature of a bearing and it’s very smooth rotation, this helps to avoid the router bit juddering or jumping around, keeping any cuts dead straight and accurate to the surface you are working on.What distinguishes these bits from others (like a straight bit used for rabbeting) is the addition of a circular pilot bearing at the bit’s tip that acts like a spinning wheel riding along the edge of the piece being cut, guiding the cutting arm to the perfect depth. As a result, the width of the cut is determined by the size of the bearing, with a smaller bearing producing a wider cut. The most common sizes of rabbet bits are 1¼ inches and 1⅜ inches, and most bits come with several interchangeable bearings ranging from ⅜-inch to 1⅛ inches. Rabbets and dadoes are both used all the time in carpentry, and they can even be combined to create a rabbet and dado joint. A dado is a three-sided channel cut into a workpiece. The channel, often referred to as a dado cut, receives another piece of material measured and cut to fit snugly inside the channel to create a dado joint. To make a rabbet and dado joint, the dado cut receives the rabbet to make a joint that is stronger and more rigid than a standard through dado. As with all other bits that produce accurate cuts, the rounding bit also includes a bearing guide at the base that is also used to control the depth of cut. Due to this rounding bits also normally include a range of different sized bearings that can be swapped out depending on the depth of cut required. This project should be read in conjunction with our project on how to use a router found here. What are the Different Parts of a Router Bit?

Glue joint bits assist joining two pieces of material by creating identical, adjoining tongues on the edge of both pieces. The notched cuts create plenty of surface area for gluing and form a tight-fitting joint that holds the pieces together while they’re being clamped. They’re available in two varieties: standard and mitered. The standard glue joint joins squared edges, while the mitered bit is made with a 45-degree angle to join two mitered edges.Contributing editor Steve Latta teaches cabinetmaking at Thaddeus Stevens College in Lancaster, Pa. The v-groove bit is very similar to the core cutting bit above but rather than leaving a rounded shape, the v-bit cuts a “V” shaped channel that runs down to a point. Not only is it used for cutting channels it can also be used for creating decorative effects in wooden panels such as doors, table edges and other similar objects. The deeper the rabbet is, the more support it provides. The vertical side also makes it easier to align the pieces of wood forming the joint. How To Make a Rabbet Joint However their main purpose is for creating decorative edges commonly used on tables, doors of various types, shelves and the similar.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop