Lian-Li O11 AIR MINI Black SPCC/Aluminum/Tempered Glass ATX Mini Tower Computer Case - O11AMX

FREE Shipping

Lian-Li O11 AIR MINI Black SPCC/Aluminum/Tempered Glass ATX Mini Tower Computer Case - O11AMX

Lian-Li O11 AIR MINI Black SPCC/Aluminum/Tempered Glass ATX Mini Tower Computer Case - O11AMX

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


My only real complaint about the O11 Air Mini came after assembly: my 3.5" Hard Disk Drives were running hot and noisy. The included thin rubber drive grommets do very little to damp vibration. I was able to fit larger and softer silicone grommets on the side mount, and placing my 7200rpm drive on these made it a lot quieter. These larger grommets cannot be used on the rear trays as there is not enough clearance for them to slide in after mounting. The close mounting to the trays also restricts airflow, which brings me to the next problem. The VGA-Vertical Top Mode gives more clearance for fan installation in the bottom, with 60mm total clearance. With an ATX motherboard only 240mm radiators can be installed in the bottom.

By now, you’ve probably gathered that the O11D Mini and the new O11 Air Mini are almost entirely different cases. They’re based on the same base principles, but externally and internally they are surprisingly different. Again though, I have to emphasize that this testing isn’t consistent and I wouldn’t put too much weight on the results. The AIO used in the new model is different. The control mechanism for the AIO isn’t good for testing, because it doesn’t give me control over the fan speeds. The case fans and speeds are all different, and the GPU is still running on the same, old paste and is developing rattly fans – that’s why we’ve otherwise retired it. When set to the 3 slot configuration a full size GPU and Mini-ITX motherboard can be installed. Additional large radiators can be mounted above and below the motherboard. Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow. The O11 AIR MINI is ideal for air cooling builds, as it has enough clearance for up to 170mm for larger tower coolers.


This is my second Lian Li case, the first being a PC-65 that is twenty years its senior. Building into the O11 Air Mini and simultaneously rebuilding into the PC-65 with my old components made for an interesting comparison. I would recommend this to anyone who wants a sleek look, while still being able to cram loads of components and cooling into their case.

In its full 7 slot configuration installing an ATX motherboard is possible.Fans can be mounted to the roof and there is space beside the motherboard to attach a radiator as well as a second radiator to the bottom of the case.Great case, enabling a very powerful system to be installed in a form factor that doesn't take over your desk. RECENSIONE: mi piace molto questo case, decisamente più piccolo del tuf gaming501 (il che devo dire che è lo stesso un case da paura, ma che per motivi di spazio e stile ho deciso di cambiarlo). When I first received the O11 Air Mini, I didn’t think I would like it. After all, the standard O11D Air wasn’t as popular as the PC-O11 Dynamic, the company ditched the pretty glass panel, and often, included case fans just aren’t all that good. Entre cosas más positivas, la gestión de cables es súper fácil y no queda fea. Me gusta que tiene una bahía para discos duros que suelo usar para guardar mis ssds externos jaja ya que se accede desde el exterior, no hay que quitar la tapa. The O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom.

The O11 AIR MINI comes with 2 x 140mm PWM front fans and 1 x 120mm PWM rear fan pre-installed straight out of the box. Get your system up and running faster with ease. Optimized Dust Management The mesh panels of O11 Air Mini are designed as dust filters and intake sufficient air into the chassis. The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case. Unsurprisingly, because there is more airflow resulting from the higher fan speeds (and the mesh front), thermals are a little better with the Mini Air.

Regarding liquid cooling, the levels of radiator support that this case offers varies depending on your chosen hardware configuration. We will discuss this further later in this review.Â

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop