LEXIN Motorcycle Bluetooth Headset with Music Sharing, 2pcs B4FM 10 Riders Helmet Bluetooth Intercom with Noise Cancellation/FM Radio, Universal Communication Systems for ATV/Motorbike/Snowmobile

£85.995
FREE Shipping

LEXIN Motorcycle Bluetooth Headset with Music Sharing, 2pcs B4FM 10 Riders Helmet Bluetooth Intercom with Noise Cancellation/FM Radio, Universal Communication Systems for ATV/Motorbike/Snowmobile

LEXIN Motorcycle Bluetooth Headset with Music Sharing, 2pcs B4FM 10 Riders Helmet Bluetooth Intercom with Noise Cancellation/FM Radio, Universal Communication Systems for ATV/Motorbike/Snowmobile

RRP: £171.99
Price: £85.995
£85.995 FREE Shipping

In stock

We accept the following payment methods

Description

The LEXIN B4FM Bluetooth Headset is extremely durable and can withstand harsh weather conditions like rain, heat, and wind. Next, you pair one end unit to a bridge unit on one motorcycle, and repeat for the second motorcycle. If you're like me and tend to shout loudly over exhaust pipes and road winds, you can easily pierce your buddy's ears. Fitting one to my AGV-K3 was fairly straight forward using the supplied screw-together clamp that grips the helmet shell.

So a small 1/4" channel was cut into the cheek pad plastic retained and voila, successful installation. Overall, we're going to stay with the Lexin intercoms, we were quite surprised how well they worked and the range was good as well.

Expert Opinion: The Cardo Packtalk Edge is a cutting-edge Bluetooth motorcycle headset designed for seamless communication with up to 15 riders within a 1mi range. The 3M exterior helmet mount is super simple to install and probably needs no instructional support. Adjust the direction of the microphone so that the triangular mark on the microphone is pointing towards your mouth. Universal pairing feature, compatible with most of the Bluetooth headsets or earpiece in the market.

So I decided to mount it just outside the mouth area, behind the front area of the cheek pad where the mic is not completely covered. The system would need to allow all 4 of us to talk at will, and require no pressing of buttons or anything while underway, no distractions. You can clip mount the B4FM to a helmet easily by slipping the clip side in between the internal padding and the external shell of the helmet. Operate temperature -10°C - 55°C (14°F - 131°F), B4FM motorcycle headphones ensure durability in any weather condition such as dust, mud, rain, or snow. Featuring excellent sound quality, digital noise cancellation,four-way intercom with up to a one mile range and FM radio.This is done by holding the vol - and intercom button until the unit goes into pairing mode, and you repeat this on the other bridge unit.

Pairing mode is shown by an alternating red and blue LED, as well as a message through the speakers. The intercom tells you battery percentage when you power up, so at the end of the day I turned it off and then back on and it reported "low battery" which makes me think we were getting to the end of the batteries life, about 10 hours in intercom mode. We don't listen to music while riding, and don't have a bunch of electronics we want to pair up to such as a GPS. I had to use the boom microphone on her helmet and ended up using a bit of hot glue to keep the wires from flopping around.

Rationale for purchasing: I ride mostly with my wife and a friend and his wife, so 2 bikes, 4 people. I did notice that the boom mic's have an orientation making and my wife's was facing front instead of back, so I was hoping that might help with the wind noise, but I was not very optimistic. Locate an area in the center of the mouth section of the helmet to install and adhere half of the microphone velcro pad. Once this thing is on your helmet, you don’t have to worry about it going anywhere while you’re riding. The majority of riders on the road will more than likely be using the more popular brands that provide better universal intercom compatibility.

After-sales service: If you encounter any problems during use, please contact the after-sales personnel first, and we will provide satisfactory after-sales service and suitable solutions. When I want to remove it from the helmet I always forget (until Jiffy-marker-ing an UP arrow) which way to push it off the helmet mount.

You should have no problems with hers mounted backwards - that 3mm plug is such a tight fit there are blog posts about folks with no audio at all simply needing to push it in HARDER. A more permanent mounting option would be to use the adhesive pad bracket mount for the outside of the helmet.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop