Holts Sealit Leak Repair 250ml

Product Information

To use Wondarweld, you’ll need to remove the top hose from the cylinder head outlet before removing the thermostat. Do this, then use a funnel to apply the product directly into the cylinder head outlet, taking care not to pour into oil as this can cause serious engine damage. In fact, you don’t even have to find the leak – we’ve done the hard work, so you don’t have to. Just pour in Holts Radweld and go. How long will Radweld last? It’s permanent for as long as it’s in the system. It’ll also prevent any further corrosion in the system and prevent any further leaks from occurring. You can even use it as a preventative measure if you’re so inclined. Can Radweld be used in any car? SEALit е необходимо да изгасите двигателя на автомобила и да го оставите, докато изстине напълно.Щом се уверите, че двигателя е напълно студен, отстранете капачката на радиатора и добавете ½от съдържанието на тубичката, ако охладителната течност на автомобила не надхвърля 7 литра.

Holts Автомобилна Добавка За Пукнатини В Радиатора или Блока, Holts

Radweld is designed to be added directly into the engine’s expansion tank. You don’t need to drain or flush the system before you use it – just pour and go. Radweld works through the radiator channels to seal leaks without any clogging or damaging effects, so all you need to do is pour it in and let it repair the leak. Simply pour and fix, it couldn’t be easier. Radweld then works its way through the system to target radiator leaks without damaging or clogging the system. Radweld provides a permanent repair for small faults in the cooling system, including the hoses and radiator. It seals without damage or clogging and can be used in all cars and with any type of coolant/antifreeze. Please ensure that you obtain and retain a proof of posting when you return your goods. This is to protect you in the event that your goods are lost in transit.Radweld works its way through the system seeking out leaks and forming permanent repairs in minutes. The product has been carefully formulated to mix with all engine coolant and antifreeze. You pour it directly into the cooling system, no need to drain or flush the system first. Radweld also provides anti-corrosion protection and prevents future leaks; it will last the lifetime of the coolant in the system. How to Use Radweld A 250 ml bottle of Wondarweld is sufficient for cooling systems up to 8-litre. How Do I Use Wondarweld? Absolutely, and our products are not just for cars. Any vehicle with a cooling system can be susceptible to leaks. So, whether it’s a small car, large car, an SUV, 4×4, motorbike, van, or even static agricultural equipment, if it has a wet cooling system with a leak – pour in some Holts Radweld to get things running again. How does Radweld seal holes without causing clogging or damage?

Holts SEALit Coolant Leak Repair - 250ml | Mole Online

SEALit произведена от Holts обединява двата продукта WONDARLWELD и RADWELD, които са предназначени за трайно и безпроблемно запушване на пукнати и отстраняване на течове от радиатора и блока. SEALit на Holtsе разработен с помощта на специална химическа формула, с чиято помощ вече е възможно ЕДНОВРЕМЕННО да се запечатат всичкиналичнипукнатини, независимо дали се намират в корпуса на блока, радиатора или и в двете. За най-добър резултат при третиране с продукта, препоръчваме преди употребата му да се запознаете подробно с начина на употреба. Вслучай, че не сте напълно сигурни за начина на употреба, се посъветвайте с наш консултант. Before using Wondarweld, drain the cooling system and flush with Cooling System Flush to remove any residue and contaminants left behind by the old coolant. After draining, reattach the bottom hose. If you suspect your car’s radiator is leaking, Radweld provides a simple means of repair. Find out more about how the product works and how to use it in our FAQs below. Is Radweld a permanent repair?Radweld can be poured directly into the cooling system, with no need to drain or flush the system first. The product also provides anti-corrosion protection and prevents future leaks; it will last the lifetime of the coolant in the system. Will Radweld clog the system? Radweld is suitable for all cars and mixes with all types of coolant/antifreeze already in the cooling system. You don’t need any special preparation to use Radweld and there’s no need to drain or flush the cooling system. These failures can occur via internal corrosion after using poor quality coolant/antifreeze, or through failure to follow the appropriate coolant change schedules. Or they could simply occur through external damage to a component of the cooling system. Radweld is compatible with coolant. Just pour and go. It seals holes in radiators, hoses, and the heater matrix. It will treat systems up to 14L capacity. After applying the product, replace the thermostat and top hose. Refill the system with clean water and run the engine for 15 minutes to repair the leak.