Princess 353130 Smart Dehumidifier

Product Information

All dehumidifiers do the same basic job of removing excess moisture from the air. However, there are three different technologies that do all the hard work. The Princess isn’t as quiet as Meaco’s Arete models, but you can live with the 46dB it puts out at its highest fan setting, or the 40dB noise levels at low. It also has a useful laundry drying feature that makes the most of the vertical swing on the air output and the powerful fan. It’s simple to control, either through the app or via the built-in controls, and you can keep an eye on the current humidity level through a subtle “hidden” digital display on the front. Rival dehumidifiers have the edge on noise and performance, but the Princess gives you a great set of features at a very reasonable price.

Compressor dehumidifiers work in much the same way as a fridge or freezer. They draw in air and cool it, condensing any moisture as it passes across a refrigerated coil. The water then drips off into a water tank below, while the air is reheated and released into the room. Compressor dehumidifiers can be noisy and may use more energy than other types, although new compressor technology and refrigerants are bringing improvements on both counts. They’re most efficient at warmer temperatures of 20°C and above, and your best bet if you need to remove lots of moisture from a larger space.It’s slightly louder and consumes more power than the equivalent refrigerant, but can also run more effectively over shorter periods. That makes it a good bet for drying clothes or using in an outside office, garage or workshop where damp is becoming a problem, and it’s relatively lightweight and portable to boot. verifyErrors }}{{ message }}{{ /verifyErrors }}{{ Don’t get too excited about any claims of silent running – we found that, while actively dehumidifying, it puts out around 50dB on all of its three settings, so you won’t want to sit and watch the TV while it’s on. However, it’s a good performer for its size, reducing humidity in a damp-prone living room by 9% in the first hour and by nearly 22% within two hours. The laundry function’s quite effective too, helping dry your washing indoors without adding a layer of condensation to the windows. And at 9kg it’s light enough to take from room to room, making this a great dehumidifier for the average flat or small to medium-sized home. When testing and selecting the best dehumidifiers we considered capcity, extraction rate, size, portability, sound and value.

It all depends on how much space you need to dehumidify. Dehumidifiers are often rated in terms of their extraction rate: how much water they can remove from the air in a single day. This is separate from their water tank capacity, which covers how much water they can store before you need to empty them out. If you’re pulling out 15 to 20 litres per day, the dehumidifier needs to have a tank with the capacity to handle it or you will be emptying it out every few hours. Three litres is the absolute minimum, while five or six litres will give you a bit less emptying to do. Is there anything else worth looking out for? High-capacity dehumidifiers are usually power-hungry and noisy, but the MeacoDry Arete One is designed to do more with less energy and a lower volume, topping out at 40dB during typical use and keeping consumption to around 200W. In fact, both figures fall dramatically as humidity levels start to drop. It’s an excellent dehumidifier for larger spaces and, unlike most compressor models, will work at temperatures of between 5 and 25°C. With a two-litre tank, it might need emptying more regularly than some models, but there’s a 1m hose if you need continuous draining into a sink or drain. And while there’s no timer, you do get a laundry mode and a choice of quiet and turbo functions, and the rotary control is – as advertised – simple and easy to use.

The best dehumidifiers you can buy in 2023

This varies according to the design, size and extraction rate. Generally speaking, desiccant dehumidifiers use more energy per hour than a compressor model, but can also work more effectively at removing moisture, which means costs tend to even out.