Creality Ender 2 Easy Assemble 3D Printer kit

FREE Shipping

Creality Ender 2 Easy Assemble 3D Printer kit

Creality Ender 2 Easy Assemble 3D Printer kit

RRP: £48.99
Price: £24.495
£24.495 FREE Shipping

In stock

We accept the following payment methods


If you see the facebook group for E2Pro, you will find some people have managed to break the thread inserts that hold the hotend to the X axis carriage just by dismantling and putting back the hotend. Next double check that the belts are tight – not too tight, just tight enough to bounce back when you press them. The silky look of this filament hides the small inconsistencies on some section of the print, but it’s still one of the best I did on this printer. It has stronger anti-interference, faster and more stable motion performance, silent printing, and low decibel operation.

Heat the hotbed to 60~70 degrees Celsius, and then shovel a little bit from the edge with a spatula. Tom's Hardware is part of Future US Inc, an international media group and leading digital publisher. It’s also worth pointing out that most Capricorn tubing kits come with a few meters of tubing and a PTFE tube cutter.And its tiny footprint is excellent for makers who need a decent second printer, but lack tons of space. The Ender 2 Pro is from the same ecosystem as its big brother the Ender 3 Pro, which opens the door to many upgrades and modifications for future improvements. I found that the noise was louder in the room next to the printer, at its loudest (when the machine is running fast) it can sound like a machine gun, defiantly not a way to get on with your neighbours! Whilst assembling I checked that everything would move freely, I found in some areas that heads of bolts clashed with the blue silicone strips that push into the extrusions.

This is a far more robust solution than early kits where the micro switches were mounted directly on the frame. This is nice because it allows to tuck it away when the printer is not in use, saving a bit of room. The file transfer is interrupted during the SD card printing process, please replace the SD card or format it to have a try. To resolve this I took the nozzle off and put a blow torch on it, this burns off anything but metal, and seems to do the trick.The idea is to leave it permanently installed on the printer so I can use standard size SD instead of the tiny micro SD cards.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop