Invision Ultra Strong TV Wall Bracket Mount Double Arm Tilt & Swivel for 37-75 Inch (94-190.5cm) LED LCD OLED Plasma & Curved Screens - Up to VESA 600mm(w) x 400mm(h) - Max Load 50kg (HDTV-DXL)

£29.995
FREE Shipping

Invision Ultra Strong TV Wall Bracket Mount Double Arm Tilt & Swivel for 37-75 Inch (94-190.5cm) LED LCD OLED Plasma & Curved Screens - Up to VESA 600mm(w) x 400mm(h) - Max Load 50kg (HDTV-DXL)

Invision Ultra Strong TV Wall Bracket Mount Double Arm Tilt & Swivel for 37-75 Inch (94-190.5cm) LED LCD OLED Plasma & Curved Screens - Up to VESA 600mm(w) x 400mm(h) - Max Load 50kg (HDTV-DXL)

RRP: £59.99
Price: £29.995
£29.995 FREE Shipping

In stock

We accept the following payment methods

Description

You will need a few additional tools: A drill and 10mm masonry drill bit or 4mm wood drill bit (depending on the fixing surface), a large Phillips screwdriver a pencil and a spirit level. If your not sure what VESA means, it refers to the measurement between the four fixing holes on the back of your TV. I did not take up the offer of an replacement part on the last bracket either as the TV bracket is so solid without the other screw holding it anyway.

This Mounting Dream model is our tilt mount of choice as it can be set up either flat to the wall or tilting down at up to eight degrees.To mount your bracket hold in position and insert the supplied screws ‘B’ into washers ‘L’ and fully tighten into the wood using a ratchet and 12 mm socket or Socket (12mm side) and Allen key ‘F’ – see diagram ‘D’. Putting the wall bracket on that line I aligned the centre drill hole of the wall bracket to that dead centre point. The arms of this large TV wall mount are made of high quality black coated cold rolled steel, making it extremely durable and anti-rust. After easily mounting the TV bracket using the fixing kit and spirit level provided, the tilting operation is smooth and easy to use and can be placed back against the wall with its ultra slim profile. Use on drywall or a stud wall may not be possible, or need extra support with professional installation.

There is no template given ( I made my own) and some instructions are less than clear so it needs thought; particularly on positioning (no advice given) .

I thought about the same height as it was on the TV stand, but my wife fancied the TV a little higher. The drill depth may have to be increased to make sure the plug can be fully inserted into the masonry). I trashed the two loose rawplugs with cutters, and managed to get them out of the wall (remember, the bracket was partially bolted to the wall, so I couldn't just pull them straight out of the wall as the bracket was in the way). You may choose to use a ratchet and 10/12mm socket but a 10/12 mm socket with Allen key is provided.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop