When you have determined the best location for your camera, secure the mount to a surface with the provided screws. To remove the protective ring, grip the stand base in one hand, and press on the outer edge to loosen. The vertical mounting point (for walls or other vertical surfaces) is located above the USB port at the rear of the camera. Gather the necessary tools: You will need a drill, screws, wall anchors (if required), and a screwdriver.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . If you find that the bracket is loose and causes the camera to not stay in the correct position, you may need to tighten the bracket. Power source: Ensure the camera is within reach of a power outlet or consider using a weatherproof extension cord if needed.Your Blink Floodlight Mount uses 4 alkaline D-cell batteries to operate and comes preinstalled in the mount.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.But the OEM mounts are truly awful and seems the third-party mount market hasn't caught up to the new specs. Therefore, it's always a good idea to consult the latest user manual or online resources provided by Blink for the most up-to-date information on mounting their outdoor cameras. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US. Note: Older Blink Outdoor camera models (XT and XT2) are not compatible with the Blink Floodlight Mount. Test the camera: Before finalizing the installation, test the camera to ensure it is capturing the desired area and functioning properly.

Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Test the camera: Before finalizing the installation, test the camera to ensure it captures the desired footage and has a strong Wi-Fi connection. Just peel off the red backing from the 3M VHB tape and stick in the desired location, let it set for a few hours and you’re ready to go.

You can verify the camera view and check placement by holding your camera in the desired location, and use the Blink app to refresh the camera thumbnail, or enter Live View. If your pull tab is missing or broken, ensure both positive and negative ends of each battery are clear of any coverings and reattempt installation. An alternative to a ground staked camera, this easy to use wall mounted version has a keyhole slot in the back to easily hang with an indention in the back for a screw head. The horizontal mounting point (for flat surfaces and ceilings) is located at the bottom of the unit. Ensure there are no obstructions like trees, bushes, or walls that could hinder the camera's line of sight.

Note: The mount and screws are non-corrosive, but if you're mounting outside, some moisture buildup may occur underneath the mount base. Mounting the Blink camera securely on a wall or surface is a crucial step to ensure optimal performance and protection.The holders attach easily with super strong VHB tape, with no mess and no drilling needed, opening up even more locations to mount your camera. Your camera push-fits firmly into the base, plus, with the included ¼” mounting bolt your camera is completely secure. Adjust the camera angle: Once the bracket is in place, adjust the camera angle for optimal coverage.